|
kalubla007 (November 30, 1999 at 12:00 am)
hi man, excuseme i don´t speak english but i will try.how do you calculate the distance and the diameter of the circles for buid the gear??i don´t knowand i was searching and i didn´t find anything.thanks for the video and thanks for read this comment.i hope your can giveme one answer or givme one link about this question.excuseme but i don´t speak english very well
DJChronikX (November 30, 1999 at 12:00 am)
I've done exactly as shown and it does work... but i can't make a gear constraint out of two of those...! How should i do it?
Langgengjaya (November 30, 1999 at 12:00 am)
Insert > Features > FlexUnder Flex Input, select Bodies for Flex and choose Twisting, then set Angle to 15deg. Set Plane 1 trimming distance at 10mm under Trim Plane 1 dialog box. Click OK
0328322 (November 30, 1999 at 12:00 am)
how do you make the last part where you twist the gear at an angle. What options should i use? at 2.17min.
purplewtruck (November 30, 1999 at 12:00 am)
it's called "flex", and it's found in insert>features>flex. click on the body you'd like to flex, and change the angle. just that easy.
GnomieGnomie (November 30, 1999 at 12:00 am)
extruded cut it with a flat surface sketch
Bettolinofilms (November 30, 1999 at 12:00 am)
thank you,,,finally something helpfull!!,,.......thanx!!!!
gacktz1207 (November 30, 1999 at 12:00 am)
can it be done by using autocad?
nkrasn11 (November 30, 1999 at 12:00 am)
Can someone help me? I have a curved surface but I need to make it flat. What should I do?
AlexLPD (November 30, 1999 at 12:00 am)
hi, nice tip there, i have seen that feature some time ago, but never really pay much attention to it. And is amazign stuff.... so, thanks for the tip |
